Clarke ENCORE MAX Návod k obsluze stáhnout pdf (Strana 25)

CLARKE 1-25

ENCORE MAX

SOLUTION FLOW

KNOB

LOW SOLUTION

LIGHT

HIGH RECOVERY

LIGHT

SOLUTION FLOW ON

SOLUTION FLOW CONTROL KNOB

The solution flow control knob is located on the console to the left of the scrub brush switch as shown in figure

20. When solution flow is on, the flow rate will be displayed as a bar shown in figure 21. The solution control

knob gives an output of 0-3 GPM. Turning the knob clockwise increased the amount of solution deposited.

Turning the knob counterclockwise decreases the amount of solution deposited. Solution flow will stop when

the brushes are off or the key is in the off position.

LOW SOLUTION INDICATOR LIGHT

The low solution amber indicator light is located on the left side above the switches on the console to the left of

the high recovery indicator light as shown in figure 20. When the low solution indicator light illuminates the

solution tanks need to be filled.

HIGH RECOVERY INDICATOR LIGHT

The high recovery red indicator light is located on the left side above the switches on the console to the right of

the low solution indicator light as shown in figure 21. When the high recovery indicator light illuminates the

recovery tank is full and needs to be drained and cleaned out.

Fig. 20

Fig. 21

CONTROLS

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 60 61

Žádné komentáře

Clarke ENCORE MAX Návod k obsluze Strana 25