Clarke CWL325V Manuál s instrukcemi Strana 5

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 16
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 4
5
WARNING: DUST GENERATED FROM CERTAIN MATERIALS CAN BE
HAZARDOUS TO YOUR HEALTH. ALWAYS OPERATE THE LATHE IN A WELL
VENTILATED AREA. USE A DUST COLLECTION SYSTEM WHENEVER
POSSIBLE.
4.
Maintain power tools.
Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the tool’s
operation. If damaged, have the tool repaired before use. Many
accidents are caused by poorly maintained power tools.
5.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
6.
Use the power tool, accessories and tool bits etc in accordance with
these instructions, taking into account the working conditions and the
work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
SERVICE
1.
Have your power tool serviced by a qualified repair person using only
identical replacement parts
. This will ensure that the safety of the power
tool is maintained.
ADDITIONAL SAFETY RULES FOR WOODLATHES
1. IMPORTANT: You should familiarise yourself with woodlathes and turning
techniques before using the machine. If there is any doubt whatsoever
you should consult a qualified person.
2. ALWAYS store chisels safety when you have finished with the machine.
3. CAUTION: This machine is designed for use with woodturning chisels only.
4. NEVER attempt to turn a workpiece unless a suitable support is used.
5. ALWAYS stop the lathe before removing workpieces, work supports or
swarf from the table.
6. ALWAYS be sure that the workpiece is securely locked in position.
7. ALWAYS keep hands and fingers away from the moving workpiece.
Zobrazit stránku 4
1 2 3 4 5 6 7 8 9 10 ... 15 16

Komentáře k této Příručce

Žádné komentáře