
ENGLISH
20
Operator’s Manual - FOCUS
®
II L17 - S20 - L20 - L20 Cyl. - BOOST
®
L20
NOTE
For correct scrubbing/drying of fl oors at the sides of the
walls, Clarke suggests to go near the walls with the right
side of the machine (A and B, Fig. 19) as shown in the
fi gure.
CAUTION!
To avoid any damage to the fl oor surface, turn off the
brushes/pad-holders when the machine stops in one
place, especially when the extra pressure function is
on.
Detergent fl ow adjustment
(For machines with Chemical Mixing System)
Turn the knob (A, Fig. 20) clockwise or counter-clockwise to
increase or decrease the detergent concentration.
The average detergent concentration values, matching the 4
colored areas of the scale (B), are shown in the fi gure.
To set the detergent quantity to zero, fully turn the knob (A)
counter-clockwise.
NOTE
The detergent concentration is kept constant even if the
washing water fl ow is changed with the switches (C) or
(D).
Working with brush/pad-holder extra pressure function
turned on
If the fl oor proves to be particularly diffi cult to clean, it is
possible to turn on the brush/pad-holder extra pressure
function by pressing the pedal (E) to position (E3).
CAUTION!
When the cylindrical brush deck (S, Fig. 2 - Page 9) is
installed, the extra pressure function is not enabled.
1.
2.
3.
Figure 19
Figure 20
Komentáře k této Příručce